What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Reroofing permits in Anaheim, CA

General California guidance last updated August 2, 2026 · Anaheim data fully re-verified September 13, 2026

What roofing contractors need to know about pulling a reroofing permit in Anaheim (Orange County).

Short answer

In California, a reroof — full tear-off or overlay — requires a building permit in nearly every jurisdiction. Reroofing is governed by the California Residential Code (Title 24, Part 2.5, Section R908) and the California Building Code (Title 24, Part 2), with cool-roof requirements from the Energy Code (Title 24, Part 6) and fire-rated assembly rules in high fire-hazard areas. A C-39 (Roofing) licensed contractor generally pulls it.

Anaheim accepts submittal through the Anaheim Next (Accela) and has adopted the 2025 California Building Standards Code (with Anaheim amendments). Fee details and sources are below.

Anaheim permit data

Sourced from public City of Anaheim documents — every field carries the source URL and verification date.

Permit portal

Anaheim Next (Accela)

verified Sep 13, 2026 · source · Stable city shortlink; resolves to https://aca-prod.accela.com/ANAHEIM/Default.aspx. Online ePermits in the portal cover single-family residential small rooftop solar, EV chargers, and electrical panel upgrades (https://www.anaheim.net/6015/Online-Permit-Center)

Adopted code edition

2025 California Building Standards Code (with Anaheim amendments)

verified Sep 13, 2026 · source · The 2025 California Building Codes and City of Anaheim amendments are enforceable for projects submitted on or after January 1, 2026; earlier submittals follow the 2022 codes. Adopted by reference in Anaheim Municipal Code § 15.03.010 — https://codelibrary.amlegal.com/codes/anaheim/latest/anaheim_ca/0-0-0-62457

Fee schedule

Combined Plan Check and Building Permit Fees (Exhibit A) — the current schedule on the Building Division's Fees page; no effective date is printed

verified Sep 13, 2026 · source · The Building Permit Application (form B715) states that projects are processed under Resolution No. 2026-078 (https://www.anaheim.net/DocumentCenter/View/39689)

City of Anaheim Planning & Building Department — Building Division →All verified Anaheim data →

The general picture in California

A reroof is treated as permitted work in nearly every California jurisdiction, whether it is a full tear-off or an overlay. The review runs on a few well-defined rails: the reroofing provisions of the California Residential Code (R908) and Building Code, which cap roofing at two applications and prohibit covering over wood shakes; the Energy Code's cool-roof requirements, which apply to certain climate zones, slopes, and product types and are documented through CRRC-rated values; and fire-rated assembly requirements in Very High Fire Hazard Severity Zones and WUI areas. Replacing sheathing brings a nailing inspection into play, and moving to a heavier covering raises a structural question the city will expect answered. Permit fees, whether the city wants an in-progress inspection, and how the pre-roof inspection is scheduled are all set per city — confirm with the local building department.

For deeper background that isn't Anaheim-specific, see the statewide reroofing guide.

Typically needs a permit

Reroofing itself triggers a permit in nearly every California jurisdiction, Anaheim included. Anaheim-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Replacing a few damaged shingles or tiles like-for-like without touching the sheathing
Patching a small area of roof covering in kind — many cities exempt minor repairs below a size threshold they define (verify locally)
Gutter and downspout replacement
Maintenance recoating of an existing membrane or coating system in many jurisdictions (verify locally)

Documents & plans generally required

Building permit application stating tear-off vs. overlay, roof area, and slope
Contractor license and city business registration
Manufacturer listing/spec for the new covering, including its fire classification
Cool-roof product documentation (CRRC-rated aged reflectance and emittance) where the Energy Code requires it for the climate zone and slope
Residential energy-compliance form (CF1R-ALT) where the cool-roof or insulation measures are triggered
Sheathing and re-nailing detail when decking is replaced or the covering changes
Structural verification when changing to a heavier covering (e.g., composition to concrete tile)
Smoke- and CO-alarm self-certification — state law ties alarm compliance to permitted alterations

Common reasons reroofing applications get bounced

Code-rooted patterns across California — not a Anaheim-specific rejection rate.

Proposing an overlay where one isn't allowed — over wood shakes, or where two applications of roofing already exist (CRC R908.3 makes that a mandatory tear-off)
Missing cool-roof documentation in climate zones where Title 24, Part 6 requires it for the product type and slope
A non-Class-A assembly proposed in a Very High Fire Hazard Severity Zone or WUI area
Switching to a heavier covering without structural verification of the framing
No sheathing/nailing schedule when decking is being replaced
Scope understated as a 'repair' when the area involved makes it a reroof

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Pre-roof/sheathing inspection after tear-off — decking condition, re-nailing, and underlayment verified before covering (some cities accept photo documentation)
2In-progress inspection for special assemblies (fire-rated or low-slope membrane systems) where the city requires one
3Final inspection with the covering complete and flashings, vents, and penetrations finished

Licensing — who can pull it

Reroofing in California is generally performed by a C-39 (Roofing) licensed contractor. A B (General Building) contractor may reroof within a larger project involving two or more unrelated trades under CSLB rules. The contractor doing the work typically pulls the permit.

Other verified Anaheim notes

Building Division: City Hall, 200 S. Anaheim Blvd., 1st Floor, Suite 145, Anaheim, CA 92805; 714-765-5153. Thursdays have a delayed opening; arrive no later than 3 p.m. to complete permit and plan check submittals.
verified Sep 13, 2026 · source
Businesses conducting business in Anaheim need an Anaheim Business License, including businesses located outside the city limits.
verified Sep 13, 2026 · source · The Building Permit Application (form B715) asks for the contractor's state license number and city license number and requires workers' compensation verification — https://www.anaheim.net/DocumentCenter/View/39689
Inspections must be scheduled by 5 p.m. the prior business day; the building project tracking application shows inspection results, time frames and status, and correction notices.
verified Sep 13, 2026 · source · Inspections are scheduled through Anaheim Next — https://www.anaheim.net/6350/ADU-Express-Process
Smaller projects that need no more than 30 minutes of plan review can typically be reviewed over the counter.
verified Sep 13, 2026 · source

Frequently asked questions

Do I need a permit for an overlay (going over the existing shingles)?

Generally yes — an overlay is still a reroof and is permitted work. California also limits when an overlay is allowed at all: no new covering over wood shakes, and no more than two applications of any roofing material. Beyond that, it's a mandatory tear-off, and the inspector will verify the existing roof qualifies.

What is the cool-roof requirement?

The California Energy Code (Title 24, Part 6) requires roofing products with minimum aged solar reflectance and thermal emittance — 'cool roofs' — for certain reroofs, depending on climate zone, roof slope, and building type. Compliance is documented through the product's CRRC rating on the energy form. Where it applies, plan check looks for the rated values, not marketing claims.

When does a repair become a reroof?

Each city draws that line, commonly by area or percentage of the roof surface. Small like-for-like patches are often exempt or handled over the counter; replacing the covering across a slope or the whole roof is a permitted reroof. Describe the true scope on the application — understating it is a common correction.

Do fire-hazard zones change what I can install?

Yes. In Very High Fire Hazard Severity Zones and Wildland-Urban Interface areas, California requires fire-rated roof assemblies (generally Class A) and ignition-resistant details. Plan check in those zones reviews the listed assembly — covering plus underlayment plus deck — not just the shingle brand.

Other jobs in Anaheim

AC changeout Battery storage EV charger install All Anaheim permits All California jobs

Want getPermit to map Anaheim in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist