AC changeout permits in San Diego, CA

General California guidance last updated May 22, 2026 · San Diego data fully re-verified

What HVAC contractors need to know about pulling a ac changeout permit in San Diego (San Diego County).

Short answer

In California, replacing a central AC condenser, coil, or furnace needs a mechanical permit (and often electrical for the condenser circuit), pulled by a licensed C-20 contractor. The work is governed by the California Mechanical Code (Title 24, Part 4) and the California Energy Code (Title 24, Part 6), and most residential replacements require third-party HERS testing for duct leakage and refrigerant-charge verification.

San Diego accepts submittal through the DSD Online Services (Accela Citizen Portal) and has adopted the 2025 California Building Standards Code (with San Diego local amendments). Fee details and sources are below.

San Diego permit data

Sourced from public City of San Diego documents — every field carries the source URL and verification date.

Permit portal
DSD Online Services (Accela Citizen Portal)

verified Sep 13, 2026 · source · Stable city shortlink; resolves to https://aca-prod.accela.com/SANDIEGO/Default.aspx, which the Permits page links as "DSD Online Services Login"

Adopted code edition

2025 California Building Standards Code (with San Diego local amendments)

verified Sep 13, 2026 · source · DSD public notice dated April 15, 2026: the 2025 code applies to all projects with applications submitted on or after January 1, 2026, and the local amendments take effect April 22, 2026. Codified in San Diego Municipal Code Chapter 14, Article 5, Division 1 (Sec. 145.0103 adopts the 2025 California Building Code; amended by O-22080 N.S., effective 4-22-2026) — https://docs.sandiego.gov/municode/MuniCodeChapter14/Ch14Art05Division01.pdf

Fee schedule
Information Bulletin 501 — Fee Schedule for Construction Permits-Structures (August 2026)

verified Sep 13, 2026 · source · Bulletin dated August 2026. Mechanical, electrical, and plumbing/gas permit fees are in Information Bulletin 103 (May 2026) — https://www.sandiego.gov/development-services/forms-publications/information-bulletins/103

The general picture in California

An HVAC changeout is permitted mechanical work in nearly every California jurisdiction. California's Title 24 Part 6 energy standards require third-party HERS verification on most residential AC and furnace replacements — typically duct-leakage testing, refrigerant-charge verification, and airflow when ducts are altered. Replacements may also require updating combustion air, condensate drainage, condenser disconnects and clearances, and a smart thermostat under some prescriptive packages. Heat-pump replacements add electrical-load and circuit considerations.

For deeper background that isn't San Diego-specific, see the statewide ac changeout guide.

Typically needs a permit

AC changeout itself triggers a permit in nearly every California jurisdiction, San Diego included. San Diego-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

  • Replacing a thermostat with a like-for-like (non-smart) unit
  • Replacing a capacitor, contactor, or fan motor on the existing condenser (repair, not replacement)
  • Cleaning coils, replacing filters, or relighting the pilot

Documents & plans generally required

Common reasons ac changeout applications get bounced

Code-rooted patterns across California — not a San Diego-specific rejection rate.

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

  1. 1Rough/in-progress not typically required for like-for-like equipment swaps
  2. 2HERS verification (third-party rater) for duct leakage and refrigerant charge as applicable
  3. 3Final inspection with the equipment installed, energized, and tested; HERS certificates filed

Licensing — who can pull it

HVAC changeouts in California are generally performed by a C-20 (Warm-Air Heating, Ventilating and Air-Conditioning) licensed contractor; a B (General Building) contractor may pull within a larger project under CSLB rules. The licensed contractor doing the work typically pulls the permit.

Other verified San Diego notes

Frequently asked questions

Do I need a permit for a like-for-like AC changeout in California?

Generally yes. Even a like-for-like AC condenser or furnace replacement triggers a mechanical permit and Title 24 Part 6 compliance (HERS testing for duct leakage and refrigerant charge) in nearly every California city. Repairs to existing equipment generally don't.

What is HERS verification and why is it required?

Title 24 Part 6 requires third-party HERS (Home Energy Rating System) raters to verify specific measures on residential replacements — most commonly duct leakage and refrigerant charge. The rater's CF2R/CF3R certificates are filed with the permit; missing HERS documentation is a top reason for rejection or failed final.

Do I need an electrical permit too?

If the condenser circuit, disconnect, or breaker is replaced or upsized, yes — that's electrical work. Most jurisdictions bundle it under the mechanical permit but require electrical scope on the application. Heat-pump conversions almost always need an electrical permit.

How does the A2L refrigerant transition affect permits?

New systems shipped after the EPA's 2025 A2L transition use mildly-flammable refrigerants (R-454B, R-32) requiring listed line sets, leak-detection where applicable, and updated installation practices. The application and cut sheets should reflect the refrigerant type; some jurisdictions are still updating their checklists.

Want getPermit to map San Diego in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist