What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Whole-house repipe permits in Sunnyvale, CA

General California guidance last updated May 22, 2026 · Sunnyvale data verified August 10, 2026

What plumbing contractors need to know about pulling a whole-house repipe permit in Sunnyvale (Santa Clara County).

Short answer

In California, a whole-house repipe needs a plumbing permit, pulled by a licensed C-36 contractor under the California Plumbing Code (Title 24, Part 5). The permit covers replacing existing supply (and sometimes drain/waste/vent) piping; common drivers include failing galvanized or polybutylene supply, slab leaks, low-pressure complaints, and pinhole leaks in copper.

Sunnyvale accepts submittal through the E-OneStop Online Services (Tyler EnerGov) and has adopted the 2025 California Building Standards Code (with Sunnyvale amendments). Fee details and sources are below.

Sunnyvale permit data

Sourced from public City of Sunnyvale documents — every field carries the source URL and verification date.

Permit portal

E-OneStop Online Services (Tyler EnerGov)

verified Aug 10, 2026 · source · All services are online through E-OneStop — apply for permits, search permit and plan history, upload documents, receive and respond to city comments, schedule inspections, and make payments

Adopted code edition

2025 California Building Standards Code (with Sunnyvale amendments)

verified Aug 10, 2026 · source · The city lists the 2025 California Building, Residential, Electrical, and companion codes as current; adopted by Ordinance 3248-25 on October 21, 2025 (Sunnyvale Municipal Code Ch. 16.16: https://ecode360.com/42720766), with local amendments effective January 1, 2026 per the council ordinance record (https://sunnyvaleca.legistar.com/LegislationDetail.aspx?ID=7682689&GUID=33162351-432E-4616-996F-0D05C49AF7D2)

Fee schedule

FY 2025-26 Building Permit Fees — effective August 18, 2025

verified Aug 10, 2026 · source · A FY 2026-27 Land Development fee schedule is already posted on the same page — watch for a FY 2026-27 building-fee update

City of Sunnyvale One-Stop Permit Center →All verified Sunnyvale data →

The general picture in California

A repipe replaces the hot/cold supply distribution throughout a structure — most commonly converting galvanized or polybutylene to PEX or copper. The permit covers pipe material, sizing, routing, fastening, insulation, manifold or trunk-and-branch layout, and pressure testing. Drain/waste/vent repipes add slope, venting, and cleanout requirements. Drywall and finish repairs are out of scope of the plumbing permit but may require their own permits if structural framing is altered.

For deeper background that isn't Sunnyvale-specific, see the statewide whole-house repipe guide.

Typically needs a permit

Whole-house repipe itself triggers a permit in nearly every California jurisdiction, Sunnyvale included. Sunnyvale-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Replacing an exposed section of supply pipe with the same material and routing (repair)
Replacing a fixture supply line, angle stop, or stop valve
Tightening or replacing a single fitting on existing pipe

Documents & plans generally required

Plumbing permit application
Contractor license and city business registration
Pipe material, size, and manufacturer (PEX-A vs. PEX-B, copper type, fitting system)
Routing plan — trunk-and-branch vs. manifold, with pipe sizes per fixture group
Pressure-test procedure and the test pressure to be held
Penetration and fire-stopping details where lines pass through rated assemblies
Listing/approval for any non-traditional pipe (specific PEX listings, fitting systems)

Common reasons whole-house repipe applications get bounced

Code-rooted patterns across California — not a Sunnyvale-specific rejection rate.

Pipe sizing not matching the fixture-unit load (undersized branches feeding multiple fixtures)
Pipe material or fitting system not listed for potable water use in California
No pressure-test procedure or insufficient hold pressure shown
Missing penetration / fire-stopping detail at rated walls and floor assemblies
Hot-water line insulation not specified per Title 24 Part 6
DWV scope missing slope, cleanouts, or venting where the repipe includes drainage

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough/cover inspection with new piping exposed, pressure-tested, and supported
2Insulation inspection for Title 24 hot-water-line insulation where applicable
3Final inspection with fixtures reconnected, pressure restored, and the system tested

Licensing — who can pull it

Repipes in California are performed by a C-36 (Plumbing) licensed contractor; a B (General Building) contractor may pull within a larger project under CSLB rules. The licensed contractor doing the work typically pulls the permit.

Other verified Sunnyvale notes

One-Stop Permit Center: City Hall, 456 W. Olive Ave., 2nd floor; 408-730-7444; Planning, Engineering, and Building counters open weekdays 8 AM–noon and 1–5 PM (closed weekends and City holidays).
verified Aug 10, 2026 · source
Over-the-counter (OTC) building plan-check appointments run in the mornings — generate the building permit online first with the project description "OTC", submit plans, then request the in-person slot.
verified Aug 10, 2026 · source
Building inspections are scheduled through the online service or by phone at 408-730-7790; the general contractor is responsible for scheduling and being present for all inspections.
verified Aug 10, 2026 · source

Frequently asked questions

Do I need a permit for a whole-house repipe in California?

Yes — replacing supply (and/or DWV) piping throughout a structure is permitted plumbing work in every California jurisdiction. The permit covers material, sizing, routing, and pressure testing; the inspector typically signs off at rough (pre-cover) and at final.

Is PEX allowed throughout California?

Yes — PEX has been approved statewide for potable water under the California Plumbing Code for over a decade. Some jurisdictions still require specific listings or limit certain fitting types; the listing should be shown on the permit submittal.

Do I need a separate permit for drywall repair?

The plumbing permit covers the pipe work only. Drywall and finish repair are typically follow-up work and don't require a separate permit unless structural framing is altered. Inspectors will require pipe access (open walls or strategic cuts) at the rough inspection.

Can a repipe be done in an occupied home?

Generally yes — most residential repipes are done with the occupants in place, with water shut off for short periods. The permit doesn't restrict occupancy; sequencing is a contractor/owner decision.

Other jobs in Sunnyvale

AC changeout Battery storage EV charger install All Sunnyvale permits All California jobs

Want getPermit to map Sunnyvale in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist