What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Battery storage permits in Tustin, CA

General California guidance last updated August 2, 2026 · Tustin data fully re-verified September 13, 2026

What electrical contractors need to know about pulling a battery storage permit in Tustin (Orange County).

Short answer

In California, installing a home or small-commercial battery energy storage system (ESS) requires an electrical permit — and residential installs are reviewed against the ESS location and clearance rules in the California Residential Code (R328) and Fire Code. The system must carry a UL 9540 listing, and the utility interconnection is a separate, parallel process. A C-10 (Electrical) or C-46 (Solar) licensed contractor generally pulls it.

Tustin accepts submittal through the Citizen Self Service (CSS) Portal and has adopted the 2025 California Building Standards Code (with Tustin amendments). Fee details and sources are below.

Tustin permit data

Sourced from public City of Tustin documents — every field carries the source URL and verification date.

Permit portal

Citizen Self Service (CSS) Portal

verified Sep 13, 2026 · source · Plans and completed permit applications are submitted through the CSS Portal; submittal questions go to PlanPermitSubmittals@tustinca.org and solar questions to PVSubmittals@tustinca.org. The city collects permit payments only through the CSS Portal or in person at the City Hall Finance counter, and never asks for a bank routing or wire number

Adopted code edition

2025 California Building Standards Code (with Tustin amendments)

verified Sep 13, 2026 · source · Tustin City Code Sec. 8100 adopts by reference the 2025 California Building, Residential, Electrical, Mechanical, Plumbing, Energy, Wildland-Urban Interface, Historical Building, Fire, Existing Building, Green Building Standards, and Referenced Standards Codes, subject to the local amendments in Article 8, Chapter 1 — enacted by Ordinance No. 1569, adopted November 18, 2025

Fee schedule

FY 2026-2027 Comprehensive Fee Schedule — effective April 1, 2026 (City Council Resolution No. 26-05, January 20, 2026); building fees under Building Division Fees

verified Sep 13, 2026 · source · The Comprehensive Schedule of Fees page lists the schedule as adopted January 20, 2026 with an effective date of April 1, 2026; the PDF cover reads "Approved by City Council Resolution No. 26-05 on January 20, 2026" and "Effective April 1, 2026"

City of Tustin Community Development — Building Division →All verified Tustin data →

The general picture in California

An ESS install is permitted electrical work throughout California, and the review is layered: the California Electrical Code (Title 24, Part 3 — Article 706 for storage, 705 for the interconnection, 690 where solar is paired), the residential ESS rules in CRC R328 with their location, clearance, and energy limits, fire-code provisions for larger systems, and the UL 9540 listing requirement that ties it together. Most corrections come from placement — where the battery sits and what it is near — and from listing documentation, not from the wiring itself. State law has pushed cities toward instant online permitting for residential solar-plus-storage, so many jurisdictions route these permits through SolarAPP+. The utility side is separate: interconnection (Rule 21 at the investor-owned utilities) runs in parallel with the city permit, and the system operates in parallel with the grid only after permission-to-operate. Fees, fire-review thresholds, and submittal format are set per city — confirm with the local building department.

For deeper background that isn't Tustin-specific, see the statewide battery storage guide.

Typically needs a permit

Battery storage itself triggers a permit in nearly every California jurisdiction, Tustin included. Tustin-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Portable plug-in power stations that aren't permanently wired to the building
The utility interconnection application itself — required, but it's a utility process, not the city permit
Monitoring or communications changes on an existing permitted system

Documents & plans generally required

Electrical permit application — many California cities process residential solar-plus-storage through SolarAPP+
Contractor license and city business registration
Single-line diagram: battery, inverter, disconnects, OCPD ratings, and the interconnection point (whole-home backup vs. backup-loads panel vs. grid-tied only)
Equipment cut sheets with the UL 9540 listing (and UL 9540A fire-test data where the AHJ requests it)
Site/floor plan showing the ESS location, mounting, and clearances from doors, windows, and egress paths
Busbar/backfeed check at the panel (the 120% rule) or a supply-side connection detail
Load calculation for a backup-loads panel
Labeling plan — disconnects, rapid shutdown where solar-paired, and emergency-responder signage

Common reasons battery storage applications get bounced

Code-rooted patterns across California — not a Tustin-specific rejection rate.

Location not allowed under CRC R328 — habitable rooms, or clearances to openings and egress not met
Missing or wrong listing — the system isn't documented as UL 9540 (a UL 1973 battery module alone is not a listed ESS)
Single-line diagram inconsistent with the cut sheets, or missing disconnect and OCPD ratings
120% rule violation at the panel without a main-breaker derate or supply-side connection
A backup-loads panel proposed without a load calculation
Per-unit or aggregate energy limits for the location exceeded without the additional protections R328 requires
No labeling/signage plan — placards are verified at final

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough inspection if any wiring or conduit is concealed before cover
2Final inspection: mounting, clearances, disconnects, labeling, and shutdown function verified — some jurisdictions add a separate fire-department review or inspection
3Utility permission-to-operate (PTO) after city sign-off — the system generally can't operate in parallel with the grid until PTO

Licensing — who can pull it

Battery storage in California is generally installed by a C-10 (Electrical) licensed contractor; a C-46 (Solar) contractor may install ESS as part of a solar energy system. A B (General Building) contractor may pull within a larger project under CSLB rules. The installing contractor typically also files the utility interconnection.

Other verified Tustin notes

Building Division: 714-573-3130 · tustinbuilding@tustinca.org. Counter hours: Monday–Thursday 7:30 a.m.–5:30 p.m., Friday 8 a.m.–5 p.m.
verified Sep 13, 2026 · source
Inspection requests are submitted through the CSS Portal 24 hours a day; requests received by 3:00 p.m. are performed the following workday. For an inspection timeframe, call the inspector between 7:30 and 8:00 a.m. on the day of the inspection.
verified Sep 13, 2026 · source
Contractors and other businesses based outside Tustin that conduct activity in the city must obtain a City of Tustin Business License, which can be applied for online at any time.
verified Sep 13, 2026 · source
Plan check by appointment for minor projects (patio covers, fences and free-standing block walls, pools and spas, kitchen and bathroom remodels), one hour maximum: email plans to planpermitsubmittals@tustinca.org at least 24 hours before the requested date with the subject "Plan Check by Appointment".
verified Sep 13, 2026 · source
The city estimates first-submittal plan check at approximately 10 working days and resubmittals at five working days, unless a special zoning or other approval is required; expedited plan check is available for a slightly higher fee.
verified Sep 13, 2026 · source
SolarAPP+: residential roof-mounted PV projects that meet the SolarAPP+ eligibility list can get automated plan review (plans submitted by a pre-approved contractor; SolarAPP+ charges a processing fee), then apply for the city's Electrical Photovoltaic (SolarAPP) permit in the CSS Portal. Properties in the Cultural Resource District or listed in the Historic Resource Survey are not eligible.
verified Sep 13, 2026 · source

Frequently asked questions

Do I need a permit to add a battery to an existing solar system?

Yes — a storage retrofit is its own electrical permit even when the PV system is already permitted. It changes the interconnection, adds NEC Article 706 scope (disconnects, listing, signage), and brings the residential ESS location and clearance rules (CRC R328) into review.

Where can a residential battery be installed?

CRC R328 restricts ESS to specific locations — typically garages, detached or accessory structures, outdoors with clearance from doors and windows, or dedicated utility spaces — with per-unit and aggregate energy limits that vary by location. Habitable rooms are off the table. Placement and clearances are the most common plan-check correction, so settle the location before finalizing the design.

What listing does the equipment need?

The ESS as a system needs a UL 9540 listing; UL 9540A is the fire-propagation test data an AHJ may request for larger installs or reduced spacing. A battery module's UL 1973 listing alone doesn't make it a listed ESS — pairing an unlisted battery with a separate inverter is a recurring rejection.

Does the city permit cover exporting to the grid?

No — parallel operation and export run through the utility's interconnection process (Rule 21 for the investor-owned utilities; municipal utilities have their own). The city permit and the utility application proceed in parallel, and the system needs the utility's permission-to-operate before it runs in parallel with the grid.

Other jobs in Tustin

AC changeout EV charger install Furnace replacement All Tustin permits All California jobs

Want getPermit to map Tustin in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist