What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Whole-house repipe permits in Newport Beach, CA

General California guidance last updated May 22, 2026 · Newport Beach data fully re-verified September 13, 2026

What plumbing contractors need to know about pulling a whole-house repipe permit in Newport Beach (Orange County).

Short answer

In California, a whole-house repipe needs a plumbing permit, pulled by a licensed C-36 contractor under the California Plumbing Code (Title 24, Part 5). The permit covers replacing existing supply (and sometimes drain/waste/vent) piping; common drivers include failing galvanized or polybutylene supply, slab leaks, low-pressure complaints, and pinhole leaks in copper.

Newport Beach accepts submittal through the CiViC Online Portal and has adopted the 2025 California Building Standards Code. Fee details and sources are below.

Newport Beach permit data

Sourced from public City of Newport Beach documents — every field carries the source URL and verification date.

Permit portal

CiViC Online Portal

verified Sep 13, 2026 · source · Permitting and plan check services available 24 hours a day, 7 days a week. The Building Division's hours page links the same portal to schedule inspections online — https://www.newportbeachca.gov/government/departments/community-development/building-division/operational-hours-staff

Adopted code edition

2025 California Building Standards Code

verified Sep 13, 2026 · source · Newport Beach Municipal Code Title 15 adopts the 2025 California Building (Ch. 15.04), Residential (15.05), Electrical (15.06), Mechanical (15.07), Plumbing (15.08), Green Building Standards (15.11), Historical Building (15.13), Existing Building (15.14), and Energy (15.17) Codes under Ordinance No. 2025-23, effective January 1, 2026

Fee schedule

Schedule of Rents, Fines and Fees — Fiscal Year 2026-27 (Building & Development fees effective July 25, 2026)

verified Sep 13, 2026 · source · Adopted via Resolution 2026-28 and incorporating additional fees adopted via Resolution 2026-56; most fees effective July 1, 2026, Building & Development fees effective July 25, 2026. Building fees are in the Community Development — Building section of the PDF

City of Newport Beach Community Development — Building Division →All verified Newport Beach data →

The general picture in California

A repipe replaces the hot/cold supply distribution throughout a structure — most commonly converting galvanized or polybutylene to PEX or copper. The permit covers pipe material, sizing, routing, fastening, insulation, manifold or trunk-and-branch layout, and pressure testing. Drain/waste/vent repipes add slope, venting, and cleanout requirements. Drywall and finish repairs are out of scope of the plumbing permit but may require their own permits if structural framing is altered.

For deeper background that isn't Newport Beach-specific, see the statewide whole-house repipe guide.

Typically needs a permit

Whole-house repipe itself triggers a permit in nearly every California jurisdiction, Newport Beach included. Newport Beach-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Replacing an exposed section of supply pipe with the same material and routing (repair)
Replacing a fixture supply line, angle stop, or stop valve
Tightening or replacing a single fitting on existing pipe

Documents & plans generally required

Plumbing permit application
Contractor license and city business registration
Pipe material, size, and manufacturer (PEX-A vs. PEX-B, copper type, fitting system)
Routing plan — trunk-and-branch vs. manifold, with pipe sizes per fixture group
Pressure-test procedure and the test pressure to be held
Penetration and fire-stopping details where lines pass through rated assemblies
Listing/approval for any non-traditional pipe (specific PEX listings, fitting systems)

Common reasons whole-house repipe applications get bounced

Code-rooted patterns across California — not a Newport Beach-specific rejection rate.

Pipe sizing not matching the fixture-unit load (undersized branches feeding multiple fixtures)
Pipe material or fitting system not listed for potable water use in California
No pressure-test procedure or insufficient hold pressure shown
Missing penetration / fire-stopping detail at rated walls and floor assemblies
Hot-water line insulation not specified per Title 24 Part 6
DWV scope missing slope, cleanouts, or venting where the repipe includes drainage

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough/cover inspection with new piping exposed, pressure-tested, and supported
2Insulation inspection for Title 24 hot-water-line insulation where applicable
3Final inspection with fixtures reconnected, pressure restored, and the system tested

Licensing — who can pull it

Repipes in California are performed by a C-36 (Plumbing) licensed contractor; a B (General Building) contractor may pull within a larger project under CSLB rules. The licensed contractor doing the work typically pulls the permit.

Other verified Newport Beach notes

Community Development main line: (949) 644-3200 · Permit Counter: (949) 718-1888. Counter hours: 7:30 AM–5:30 PM Monday–Thursday, 7:30 AM–4:30 PM Friday.
verified Sep 13, 2026 · source
Businesses based outside Newport Beach that conduct activity in the City — contractors included — must file a City Business License Tax application.
verified Sep 13, 2026 · source
Residential Express Permits (single-family/duplex stand-alone projects) cover simple single-scope work such as a new ceiling fan, furnace replacement, reroofing, or window and door changeouts; they are not for remodels or projects that require multiple permits and plan review.
verified Sep 13, 2026 · source
Per the city's CiViC inspection-scheduling guide, you do not need to be a contact on the permit to schedule an inspection, but you do need a CiViC account.
verified Sep 13, 2026 · source
Since August 1, 2024, all new photovoltaic and energy storage system submittals are online only; single-family and duplex residential projects are eligible only through SolarAPP+, and other solar projects are submitted through CiViC.
verified Sep 13, 2026 · source
Online plan submittals: upload complete construction plans as a single combined PDF that is not password protected, printed landscape, and to scale.
verified Sep 13, 2026 · source

Frequently asked questions

Do I need a permit for a whole-house repipe in California?

Yes — replacing supply (and/or DWV) piping throughout a structure is permitted plumbing work in every California jurisdiction. The permit covers material, sizing, routing, and pressure testing; the inspector typically signs off at rough (pre-cover) and at final.

Is PEX allowed throughout California?

Yes — PEX has been approved statewide for potable water under the California Plumbing Code for over a decade. Some jurisdictions still require specific listings or limit certain fitting types; the listing should be shown on the permit submittal.

Do I need a separate permit for drywall repair?

The plumbing permit covers the pipe work only. Drywall and finish repair are typically follow-up work and don't require a separate permit unless structural framing is altered. Inspectors will require pipe access (open walls or strategic cuts) at the rough inspection.

Can a repipe be done in an occupied home?

Generally yes — most residential repipes are done with the occupants in place, with water shut off for short periods. The permit doesn't restrict occupancy; sequencing is a contractor/owner decision.

Other jobs in Newport Beach

AC changeout Battery storage EV charger install All Newport Beach permits All California jobs

Want getPermit to map Newport Beach in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist