What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

AC changeout permits in Unincorporated Los Angeles County, CA

General California guidance last updated May 22, 2026 · Unincorporated Los Angeles County data fully re-verified September 13, 2026

What HVAC contractors need to know about pulling a ac changeout permit in Unincorporated Los Angeles County.

Short answer

In California, replacing a central AC condenser, coil, or furnace needs a mechanical permit (and often electrical for the condenser circuit), pulled by a licensed C-20 contractor. The work is governed by the California Mechanical Code (Title 24, Part 4) and the California Energy Code (Title 24, Part 6), and most residential replacements require third-party HERS testing for duct leakage and refrigerant-charge verification.

Unincorporated Los Angeles County accepts submittal through the EPIC-LA (Electronic Permitting and Inspections for the County of Los Angeles) and has adopted the 2026 County of Los Angeles Building Code (Title 26), adopting the 2025 California Building Code with County amendments. Fee details and sources are below.

Unincorporated Los Angeles County permit data

Sourced from public Los Angeles County documents — every field carries the source URL and verification date.

Permit portal

EPIC-LA (Electronic Permitting and Inspections for the County of Los Angeles)

verified Sep 13, 2026 · source · Building and Safety's online portal for the unincorporated areas: submit plans, specifications, and supporting documents for review and approval, pay permit fees, and apply for a permit. Contract cities use the separate Building and Safety Online Plan Check System (BSOP)

Adopted code edition

2026 County of Los Angeles Building Code (Title 26), adopting the 2025 California Building Code with County amendments

verified Sep 13, 2026 · source · Title 26 Sec. 100 adopts the 2025 California Building Code by reference, except as changed or modified in Title 26 (Ord. 2025-0047). Per Public Works' codes page, the 2026 County codes took effect January 1, 2026 for projects with an application date on or after that date — https://pw.lacounty.gov/building-and-safety/general

Fee schedule

Building and Safety fee schedules (County section, 2026-27) — building permit fees effective July 1, 2026 in unincorporated Los Angeles County

verified Sep 13, 2026 · source · The County's Building Code Fee Schedule (Title 26) PDF sets building permit fees in the unincorporated territory effective July 1, 2026; the 2026-2027 County public notice announces a 3.4% increase effective July 1, 2026 — https://pw.lacounty.gov/bsd/lib/fp/fees/County/2026-2027%20County%20Public%20Notice.pdf. Electrical, mechanical, plumbing, grading, and valuation tables are listed on the same index page

Los Angeles County Public Works — Building and Safety Division →All verified Unincorporated Los Angeles County data →

The general picture in California

An HVAC changeout is permitted mechanical work in nearly every California jurisdiction. California's Title 24 Part 6 energy standards require third-party HERS verification on most residential AC and furnace replacements — typically duct-leakage testing, refrigerant-charge verification, and airflow when ducts are altered. Replacements may also require updating combustion air, condensate drainage, condenser disconnects and clearances, and a smart thermostat under some prescriptive packages. Heat-pump replacements add electrical-load and circuit considerations.

For deeper background that isn't Unincorporated Los Angeles County-specific, see the statewide ac changeout guide.

Typically needs a permit

AC changeout itself triggers a permit in nearly every California jurisdiction, Unincorporated Los Angeles County included. Unincorporated Los Angeles County-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Replacing a thermostat with a like-for-like (non-smart) unit
Replacing a capacitor, contactor, or fan motor on the existing condenser (repair, not replacement)
Cleaning coils, replacing filters, or relighting the pilot

Documents & plans generally required

Mechanical permit application (and electrical permit when the condenser circuit is replaced or upsized)
Contractor license and city business registration
Cut sheets for the new equipment (condenser, coil, furnace/air handler) with AHRI match
Title 24 Part 6 compliance documentation (CF1R, plus CF2R/CF3R from the HERS rater)
Refrigerant type and line-set details (especially R-410A → R-454B / A2L transitions)
Condensate drainage route and termination
Electrical disconnect and condenser-circuit details if changed

Common reasons ac changeout applications get bounced

Code-rooted patterns across California — not a Unincorporated Los Angeles County-specific rejection rate.

Missing Title 24 Part 6 documentation or HERS registration
AHRI match certificate missing or doesn't match the proposed condenser + coil combination
Refrigerant type / line-set compatibility not addressed (A2L compliance for new installs)
Condenser placement clearances not shown (NEC 110.26 + manufacturer's clearance + setback ordinances)
Condensate drainage to an unapproved location or without a secondary safety drain/switch
No detail on duct-leakage testing or refrigerant-charge verification on a duct-altered system

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough/in-progress not typically required for like-for-like equipment swaps
2HERS verification (third-party rater) for duct leakage and refrigerant charge as applicable
3Final inspection with the equipment installed, energized, and tested; HERS certificates filed

Licensing — who can pull it

HVAC changeouts in California are generally performed by a C-20 (Warm-Air Heating, Ventilating and Air-Conditioning) licensed contractor; a B (General Building) contractor may pull within a larger project under CSLB rules. The licensed contractor doing the work typically pulls the permit.

Other verified Unincorporated Los Angeles County notes

Los Angeles County Building and Safety, managed by LA County Public Works, provides building services to unincorporated communities at the Public Works headquarters (900 S. Fremont Avenue, Alhambra, CA 91803) and at Building and Safety District Offices.
verified Sep 13, 2026 · source
The Public Works Service Locator (https://pw.lacounty.gov/general/servicelocator/) shows the Building and Safety office that serves an address; if a County Building and Safety office does not serve the property, it shows the jurisdiction that does.
verified Sep 13, 2026 · source
A permit can only be issued to a contractor with the appropriate license(s), to the property owner in certain cases, or to an authorized agent representing one of these two permittees.
verified Sep 13, 2026 · source
Inspections for permits in the unincorporated areas are requested online through the permit holder's EPIC-LA account, at least 24 hours in advance.
verified Sep 13, 2026 · source
Express Permits — for standalone work or projects whose building permit is already issued — are submitted online only through EPIC-LA; once all required fees are paid, the permit is issued automatically.
verified Sep 13, 2026 · source
Wildfire rebuilds: projects to repair, restore, demolish, or replace residential structures substantially damaged or destroyed in the 2025 Eaton and Palisades wildfires may comply with the 2022 Building Standards Code as adopted by the County, provided the plans meet the 2025 fire and public safety requirements and National Flood Insurance Program minimum elevation requirements (Title 26 Sec. 100).
verified Sep 13, 2026 · source
Wildfire rebuilds: LA County runs One-Stop Permit Centers in the Eaton and Palisades fire burn areas — Altadena (464 W Woodbury Rd. Suite 210, Altadena, CA 91001) and Calabasas (27001 Agoura Road, Suite 250) — and offers free virtual rebuild appointments for County unincorporated-area residents.
verified Sep 13, 2026 · source
Wildfire rebuilds: the Board of Supervisors approved deferring and refunding fees for qualifying owners rebuilding single-family homes in unincorporated Los Angeles County after the Eaton and Palisades wildfires; applicants must show they both owned and lived on the property before January 7, 2025, and the fees will not be collected from property owners.
verified Sep 13, 2026 · source

Frequently asked questions

Do I need a permit for a like-for-like AC changeout in California?

Generally yes. Even a like-for-like AC condenser or furnace replacement triggers a mechanical permit and Title 24 Part 6 compliance (HERS testing for duct leakage and refrigerant charge) in nearly every California city. Repairs to existing equipment generally don't.

What is HERS verification and why is it required?

Title 24 Part 6 requires third-party HERS (Home Energy Rating System) raters to verify specific measures on residential replacements — most commonly duct leakage and refrigerant charge. The rater's CF2R/CF3R certificates are filed with the permit; missing HERS documentation is a top reason for rejection or failed final.

Do I need an electrical permit too?

If the condenser circuit, disconnect, or breaker is replaced or upsized, yes — that's electrical work. Most jurisdictions bundle it under the mechanical permit but require electrical scope on the application. Heat-pump conversions almost always need an electrical permit.

How does the A2L refrigerant transition affect permits?

New systems shipped after the EPA's 2025 A2L transition use mildly-flammable refrigerants (R-454B, R-32) requiring listed line sets, leak-detection where applicable, and updated installation practices. The application and cut sheets should reflect the refrigerant type; some jurisdictions are still updating their checklists.

Other jobs in Unincorporated Los Angeles County

Battery storage EV charger install Furnace replacement All Unincorporated Los Angeles County permits All California jobs

Want getPermit to map Unincorporated Los Angeles County in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist