What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Battery storage permits in Unincorporated Los Angeles County, CA

General California guidance last updated August 2, 2026 · Unincorporated Los Angeles County data fully re-verified September 13, 2026

What electrical contractors need to know about pulling a battery storage permit in Unincorporated Los Angeles County.

Short answer

In California, installing a home or small-commercial battery energy storage system (ESS) requires an electrical permit — and residential installs are reviewed against the ESS location and clearance rules in the California Residential Code (R328) and Fire Code. The system must carry a UL 9540 listing, and the utility interconnection is a separate, parallel process. A C-10 (Electrical) or C-46 (Solar) licensed contractor generally pulls it.

Unincorporated Los Angeles County accepts submittal through the EPIC-LA (Electronic Permitting and Inspections for the County of Los Angeles) and has adopted the 2026 County of Los Angeles Building Code (Title 26), adopting the 2025 California Building Code with County amendments. Fee details and sources are below.

Unincorporated Los Angeles County permit data

Sourced from public Los Angeles County documents — every field carries the source URL and verification date.

Permit portal

EPIC-LA (Electronic Permitting and Inspections for the County of Los Angeles)

verified Sep 13, 2026 · source · Building and Safety's online portal for the unincorporated areas: submit plans, specifications, and supporting documents for review and approval, pay permit fees, and apply for a permit. Contract cities use the separate Building and Safety Online Plan Check System (BSOP)

Adopted code edition

2026 County of Los Angeles Building Code (Title 26), adopting the 2025 California Building Code with County amendments

verified Sep 13, 2026 · source · Title 26 Sec. 100 adopts the 2025 California Building Code by reference, except as changed or modified in Title 26 (Ord. 2025-0047). Per Public Works' codes page, the 2026 County codes took effect January 1, 2026 for projects with an application date on or after that date — https://pw.lacounty.gov/building-and-safety/general

Fee schedule

Building and Safety fee schedules (County section, 2026-27) — building permit fees effective July 1, 2026 in unincorporated Los Angeles County

verified Sep 13, 2026 · source · The County's Building Code Fee Schedule (Title 26) PDF sets building permit fees in the unincorporated territory effective July 1, 2026; the 2026-2027 County public notice announces a 3.4% increase effective July 1, 2026 — https://pw.lacounty.gov/bsd/lib/fp/fees/County/2026-2027%20County%20Public%20Notice.pdf. Electrical, mechanical, plumbing, grading, and valuation tables are listed on the same index page

Los Angeles County Public Works — Building and Safety Division →All verified Unincorporated Los Angeles County data →

The general picture in California

An ESS install is permitted electrical work throughout California, and the review is layered: the California Electrical Code (Title 24, Part 3 — Article 706 for storage, 705 for the interconnection, 690 where solar is paired), the residential ESS rules in CRC R328 with their location, clearance, and energy limits, fire-code provisions for larger systems, and the UL 9540 listing requirement that ties it together. Most corrections come from placement — where the battery sits and what it is near — and from listing documentation, not from the wiring itself. State law has pushed cities toward instant online permitting for residential solar-plus-storage, so many jurisdictions route these permits through SolarAPP+. The utility side is separate: interconnection (Rule 21 at the investor-owned utilities) runs in parallel with the city permit, and the system operates in parallel with the grid only after permission-to-operate. Fees, fire-review thresholds, and submittal format are set per city — confirm with the local building department.

For deeper background that isn't Unincorporated Los Angeles County-specific, see the statewide battery storage guide.

Typically needs a permit

Battery storage itself triggers a permit in nearly every California jurisdiction, Unincorporated Los Angeles County included. Unincorporated Los Angeles County-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Portable plug-in power stations that aren't permanently wired to the building
The utility interconnection application itself — required, but it's a utility process, not the city permit
Monitoring or communications changes on an existing permitted system

Documents & plans generally required

Electrical permit application — many California cities process residential solar-plus-storage through SolarAPP+
Contractor license and city business registration
Single-line diagram: battery, inverter, disconnects, OCPD ratings, and the interconnection point (whole-home backup vs. backup-loads panel vs. grid-tied only)
Equipment cut sheets with the UL 9540 listing (and UL 9540A fire-test data where the AHJ requests it)
Site/floor plan showing the ESS location, mounting, and clearances from doors, windows, and egress paths
Busbar/backfeed check at the panel (the 120% rule) or a supply-side connection detail
Load calculation for a backup-loads panel
Labeling plan — disconnects, rapid shutdown where solar-paired, and emergency-responder signage

Common reasons battery storage applications get bounced

Code-rooted patterns across California — not a Unincorporated Los Angeles County-specific rejection rate.

Location not allowed under CRC R328 — habitable rooms, or clearances to openings and egress not met
Missing or wrong listing — the system isn't documented as UL 9540 (a UL 1973 battery module alone is not a listed ESS)
Single-line diagram inconsistent with the cut sheets, or missing disconnect and OCPD ratings
120% rule violation at the panel without a main-breaker derate or supply-side connection
A backup-loads panel proposed without a load calculation
Per-unit or aggregate energy limits for the location exceeded without the additional protections R328 requires
No labeling/signage plan — placards are verified at final

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough inspection if any wiring or conduit is concealed before cover
2Final inspection: mounting, clearances, disconnects, labeling, and shutdown function verified — some jurisdictions add a separate fire-department review or inspection
3Utility permission-to-operate (PTO) after city sign-off — the system generally can't operate in parallel with the grid until PTO

Licensing — who can pull it

Battery storage in California is generally installed by a C-10 (Electrical) licensed contractor; a C-46 (Solar) contractor may install ESS as part of a solar energy system. A B (General Building) contractor may pull within a larger project under CSLB rules. The installing contractor typically also files the utility interconnection.

Other verified Unincorporated Los Angeles County notes

Los Angeles County Building and Safety, managed by LA County Public Works, provides building services to unincorporated communities at the Public Works headquarters (900 S. Fremont Avenue, Alhambra, CA 91803) and at Building and Safety District Offices.
verified Sep 13, 2026 · source
The Public Works Service Locator (https://pw.lacounty.gov/general/servicelocator/) shows the Building and Safety office that serves an address; if a County Building and Safety office does not serve the property, it shows the jurisdiction that does.
verified Sep 13, 2026 · source
A permit can only be issued to a contractor with the appropriate license(s), to the property owner in certain cases, or to an authorized agent representing one of these two permittees.
verified Sep 13, 2026 · source
Inspections for permits in the unincorporated areas are requested online through the permit holder's EPIC-LA account, at least 24 hours in advance.
verified Sep 13, 2026 · source
Express Permits — for standalone work or projects whose building permit is already issued — are submitted online only through EPIC-LA; once all required fees are paid, the permit is issued automatically.
verified Sep 13, 2026 · source
Wildfire rebuilds: projects to repair, restore, demolish, or replace residential structures substantially damaged or destroyed in the 2025 Eaton and Palisades wildfires may comply with the 2022 Building Standards Code as adopted by the County, provided the plans meet the 2025 fire and public safety requirements and National Flood Insurance Program minimum elevation requirements (Title 26 Sec. 100).
verified Sep 13, 2026 · source
Wildfire rebuilds: LA County runs One-Stop Permit Centers in the Eaton and Palisades fire burn areas — Altadena (464 W Woodbury Rd. Suite 210, Altadena, CA 91001) and Calabasas (27001 Agoura Road, Suite 250) — and offers free virtual rebuild appointments for County unincorporated-area residents.
verified Sep 13, 2026 · source
Wildfire rebuilds: the Board of Supervisors approved deferring and refunding fees for qualifying owners rebuilding single-family homes in unincorporated Los Angeles County after the Eaton and Palisades wildfires; applicants must show they both owned and lived on the property before January 7, 2025, and the fees will not be collected from property owners.
verified Sep 13, 2026 · source

Frequently asked questions

Do I need a permit to add a battery to an existing solar system?

Yes — a storage retrofit is its own electrical permit even when the PV system is already permitted. It changes the interconnection, adds NEC Article 706 scope (disconnects, listing, signage), and brings the residential ESS location and clearance rules (CRC R328) into review.

Where can a residential battery be installed?

CRC R328 restricts ESS to specific locations — typically garages, detached or accessory structures, outdoors with clearance from doors and windows, or dedicated utility spaces — with per-unit and aggregate energy limits that vary by location. Habitable rooms are off the table. Placement and clearances are the most common plan-check correction, so settle the location before finalizing the design.

What listing does the equipment need?

The ESS as a system needs a UL 9540 listing; UL 9540A is the fire-propagation test data an AHJ may request for larger installs or reduced spacing. A battery module's UL 1973 listing alone doesn't make it a listed ESS — pairing an unlisted battery with a separate inverter is a recurring rejection.

Does the city permit cover exporting to the grid?

No — parallel operation and export run through the utility's interconnection process (Rule 21 for the investor-owned utilities; municipal utilities have their own). The city permit and the utility application proceed in parallel, and the system needs the utility's permission-to-operate before it runs in parallel with the grid.

Other jobs in Unincorporated Los Angeles County

AC changeout EV charger install Furnace replacement All Unincorporated Los Angeles County permits All California jobs

Want getPermit to map Unincorporated Los Angeles County in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist