What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Repipe permits in Texas

Last updated September 13, 2026

Early Texas guides. getPermit is California-first — these pages share what we've verified in Texas so far, and they don't mean getPermit covers Texas yet. Join the waitlist with your city to tell us where to go deeper.

A plain-English starting point for plumbing contractors. This is general Texas guidance — fees, forms, and timelines are set by each city.

Short answer

Repiping a home needs a plumbing permit in Texas cities: state law exempts only small repairs, like fixing leaks and faucets, from the plumbing permit requirement, and Fort Worth and Plano list repairing plumbing and replacing water lines as permitted work. The permit is pulled by a TSBPE-licensed Responsible Master Plumber who meets the city's registration rules.

The general picture

Texas sets the floor for plumbing permits statewide: repairs like fixing a leak or a faucet are exempt, and larger work needs a permit pulled by a licensed master plumber. Each city then adopts its plumbing code — the Dallas–Fort Worth cities we've checked use the International Plumbing Code — and sets its own contractor registration rules. Expect a rough inspection with a pressure test before walls close. See the Texas city pages for verified local notes.

Typically needs a permit

Replacing water supply piping, rerouting or upsizing lines, and replacing buried or concealed piping. Plano's permit handout lists replacing water or sewer lines as permitted work, with repairs like exchanging washers and faucets exempt.

Usually doesn't (general norm)

Repairing a leak or a faucet
Exchanging washers or replacing fixtures on existing plumbing

Documents & plans generally required

Plumbing permit application
Responsible Master Plumber license number and city registration
Scope: fixtures served, pipe material, and pipe sizes
Pressure-reducing valve and shutoff details where they change

Common reasons repipe applications get bounced

Code-rooted patterns across Texas — not a city-specific rejection rate.

Work filed as a repair when piping is being replaced
Pipe material not approved under the city's adopted plumbing code
Walls closed before the rough inspection and pressure test
Plumber not registered with the city where registration is required

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough inspection with a pressure test before walls are closed
2Final inspection after fixtures are reconnected

Licensing — who can pull it

Repiping in Texas is done by a TSBPE-licensed plumber, with a Responsible Master Plumber pulling the permit. Texas lets cities adopt either the Uniform Plumbing Code or the International Plumbing Code, with local amendments.

How this works in your Texas city

Cities marked have verified local data — portal, fee schedule, adopted code edition, and local permit notes sourced from public city and county documents. Every city page links to its official building department.

Dallas Fort Worth Arlington Plano

Frequently asked questions

Do I need a permit to repipe a house in Texas?

Yes. Texas exempts only small repairs, like fixing leaks and faucets, from the plumbing permit requirement.

Which plumbing code applies in Texas?

Each city adopts either the Uniform Plumbing Code or the International Plumbing Code, with local amendments. The Dallas–Fort Worth cities we've checked use the International Plumbing Code.

Who can repipe a house in Texas?

A TSBPE-licensed plumber, with a Responsible Master Plumber pulling the permit.

Other common jobs

AC changeout Battery storage EV charger install All jobs All Texas guides

Want getPermit to map your city in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist