What does getPermit actually do?

getPermit reads your job details and tells you what a California city expects before you file: which permits the work triggers, the documents and plans you'll need, the fees to budget for, and the common reasons applications in that jurisdiction get bounced back. It produces a clear checklist you can act on. It does not submit to the city for you — you (or your permit person) stay in control of what gets filed.

Is there a human involved, or is it just AI?

Both. The AI does the research and drafts the assessment and checklist; an experienced permit coordinator reviews and approves it before it's treated as authoritative. The human check is the point — it's how we keep it trustworthy in a process where a wrong filing has real consequences.

Which cities do you cover?

We're starting deep in California rather than shallow everywhere. For a city we haven't fully mapped yet, we'll give you accurate general California guidance and point you to that city's official building department — and you can join the waitlist to be notified when we cover it in depth. We will not invent city-specific fees or timelines we haven't verified.

Solo electricians, plumbers, and HVAC contractors, and small general contractors who don't have a dedicated permit department and lose billable hours to permit admin.

How much does it cost?

It's pre-launch. Join the waitlist and you'll get founder pricing, your jurisdiction prioritized, and a direct line to the team. No spam, no credit card.

We're onboarding a first set of California contractors. Join the waitlist with your city and trade so we can prioritize the jurisdictions our early users actually work in.

Subpanel installation permits in Hayward, CA

General California guidance last updated September 23, 2026 · Hayward data fully re-verified August 9, 2026

What electrical contractors need to know about pulling a subpanel installation permit in Hayward (Alameda County).

Short answer

In California, adding or replacing a subpanel requires an electrical permit — the feeder, overcurrent protection, grounding, and panel location are all plan-checked and inspected under the California Electrical Code (Title 24, Part 3). A C-10 (Electrical) licensed contractor generally pulls it.

Hayward accepts submittal through the Hayward e-Permits Portal (Tyler EnerGov Citizen Self Service) and has adopted the 2025 California Building Standards Code (Title 24, with Hayward amendments). Fee details and sources are below.

Hayward permit data

Sourced from public City of Hayward documents — every field carries the source URL and verification date.

Permit portal

Hayward e-Permits Portal (Tyler EnerGov Citizen Self Service)

verified Aug 9, 2026 · source · Stable city shortlink; currently resolves to https://haywardca-energovpub.tylerhost.net/Apps/SelfService#/home. Used to submit permit applications, add contractors to a project, pay fees, download permits, and schedule inspections

Adopted code edition

2025 California Building Standards Code (Title 24, with Hayward amendments)

verified Aug 9, 2026 · source · Ordinance No. 25-13 (adopted December 2, 2025) adopts the 2025 California Building Code by reference as the Building Code of the City of Hayward, with local amendments; effective January 1, 2026. Note: this ordinance URL responds to GET requests only (HEAD returns 404)

Fee schedule

Adopted FY 2026-27 Master Fee Schedule and Hourly Rates — effective July 1, 2026; building permit fees calculated by valuation under Development Services

verified Aug 9, 2026 · source

City of Hayward Permit Center →All verified Hayward data →

The general picture in California

A subpanel is permitted electrical work in every California jurisdiction because it is new distribution equipment: a feeder sized to an overcurrent device, a grounding arrangement that must be right, and a location with code-required working clearance. The review centers on three things. First, the load calculation — a subpanel moves capacity around but doesn't add any, so the calc has to show the service behind it can carry the load (when it can't, the job grows into a service upgrade — a separate scope). Second, grounding: a four-wire feeder with neutral and ground kept separate at the subpanel, plus a grounding-electrode system when the panel serves a detached structure. Third, placement — clearances kept, and no panels in clothes closets or bathrooms. Fees, whether the city wants the trench open at rough, and scheduling are set per city — confirm with the local building department.

For deeper background that isn't Hayward-specific, see the statewide subpanel installation guide.

Typically needs a permit

Subpanel installation itself triggers a permit in nearly every California jurisdiction, Hayward included. Hayward-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

Resetting breakers and updating the panel directory
Replacing a breaker like-for-like — treated differently city to city, verify locally
Cover-plate and labeling maintenance

Documents & plans generally required

Electrical permit application
Contractor license and city business registration
Load calculation supporting the feeder and the service behind it
Single-line/panel schedule — feeder size, overcurrent protection, and the circuits landing in the new panel
Grounding detail — four-wire feeder with neutral and ground separated at the subpanel
Panel location and working-clearance detail
For detached structures: feeder routing (often trenched) and the grounding-electrode system at the building

Common reasons subpanel installation applications get bounced

Code-rooted patterns across California — not a Hayward-specific rejection rate.

Neutral and ground bonded together at the subpanel — the bond belongs only at the service disconnect
Feeder conductor size not matched to the overcurrent device, or no load calc supporting it
Working clearance not maintained — roughly 30" wide, 36" deep, and 6'6" of headroom kept permanently clear
Panel located where panels aren't allowed — clothes closets, bathrooms
A legacy three-wire feeder proposed where a four-wire feeder with an equipment ground is required
Detached-structure subpanel without its own grounding-electrode connection

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

1Rough inspection where the feeder is concealed in framing or a trench before cover
2Final inspection with the panel set, breakers landed, the directory filled out, and clearances verified

Licensing — who can pull it

Subpanel installation in California is C-10 (Electrical) licensed work; a B (General Building) contractor may pull within a larger project under CSLB rules. The contractor doing the work typically pulls the permit.

Other verified Hayward notes

Permit Center: 777 B Street, 1st floor lobby, Hayward, CA 94541; permits (510) 583-4005, Building Division (510) 583-4140; Monday–Thursday 9 AM–1 PM walk-ins, 1–5 PM by appointment.
verified Aug 9, 2026 · source
An e-Permits account is required for all users applying online — including customers who held permits before the portal launched; contractors are added to projects inside the portal.
verified Aug 9, 2026 · source
The e-Permits Portal schedules inspections and shows live status — including the inspector's estimated time of arrival (ETA) and inspection results.
verified Aug 9, 2026 · source
City Hall — including the Permit Center — is closed to the public on Fridays; Friday service is by virtual appointment only.
verified Aug 9, 2026 · source

Frequently asked questions

Do I need a permit for a subpanel in a garage or shop?

Yes — a subpanel is new distribution equipment fed by a feeder, and it's permitted electrical work everywhere in California. A detached garage or shop adds scope: the feeder route (often trenched) and a grounding-electrode system at the detached building.

Why can't neutral and ground be bonded in a subpanel?

The neutral-to-ground bond exists at the service disconnect only. Downstream, neutrals and grounds run on separate bars so fault current returns on the equipment-grounding conductor — a bonded subpanel puts normal neutral current on the grounding path. It's the most common subpanel correction, especially on panels reused from service duty.

Does adding a subpanel mean upgrading the main service?

Not automatically — the load calculation decides. A subpanel redistributes capacity; it doesn't create it. If the calc shows the existing service can't carry the added load, the project becomes a service upgrade, which is its own permit scope.

Can the subpanel go in a closet?

Not in a clothes closet or a bathroom, and wherever it goes the working clearance has to stay permanently clear. Garages, utility rooms, and hallways with clearance are the usual locations. Placement is checked at plan review and again at final.

Other jobs in Hayward

AC changeout Battery storage Duct replacement All Hayward permits All California jobs

Want getPermit to map Hayward in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist