Duct replacement permits in Long Beach, CA

General California guidance last updated September 23, 2026 · Long Beach data fully re-verified

What HVAC contractors need to know about pulling a duct replacement permit in Long Beach (Los Angeles County).

Short answer

In California, replacing or extending ductwork requires a mechanical permit, and the Energy Code (Title 24, Part 6) treats it as an alteration: replacing a duct system entirely — or adding/replacing more than about 40 linear feet in unconditioned space — generally triggers duct sealing with third-party HERS leakage testing. Ducts must meet the insulation R-value for the climate zone. A C-20 (HVAC) licensed contractor generally pulls it.

Long Beach accepts submittal through the LB Services — Permitting and Licensing and has adopted the 2025 California Building Standards Code (with the Long Beach Municipal Code). Fee details and sources are below.

Long Beach permit data

Sourced from public City of Long Beach documents — every field carries the source URL and verification date.

Permit portal
LB Services — Permitting and Licensing

verified Aug 10, 2026 · source · The city's online permit system covers express permits — renewable energy (PV, ESS, EV chargers), reroofs, electrical panel/subpanel changeouts, water heater changeouts for single-family/duplex dwellings, and certain commercial project types

Adopted code edition

2025 California Building Standards Code (with the Long Beach Municipal Code)

verified Aug 10, 2026 · source · Effective January 1, 2026, all projects must comply with the 2025 Edition of the California Building Standards Code and the Long Beach Municipal Code (LBMC) to receive approval, as required by state law

Fee schedule
Building Permit & Plan Check Fees — fee changes effective May 20, 2026

verified Aug 10, 2026 · source · Separate schedules for electrical, plumbing, mechanical, and fire fees are published on the same fee-schedules listing page

Long Beach Community Development — Building & Safety Bureau →All verified Long Beach data →

The general picture in California

Ductwork replacement is permitted mechanical work across California, and the review is mostly an Energy Code review. Title 24, Part 6 treats duct work as an alteration: replace the system, or add or replace more than about 40 linear feet in unconditioned space, and duct sealing with third-party HERS leakage verification generally follows — documented on a CF1R-ALT and registered before final. The materials layer is simple but strictly checked: insulation at the climate zone's required R-value (R-6 or R-8 in most cases), joints sealed with mastic or listed UL 181 tape — never cloth-backed duct tape — and flex duct supported so it isn't kinked or compressed. Because the HERS rater is independent, the schedule needs their test and registration between substantial completion and final inspection. Fees, forms, and inspection scheduling are set per city — confirm with the local building department.

For deeper background that isn't Long Beach-specific, see the statewide duct replacement guide.

Typically needs a permit

Duct replacement itself triggers a permit in nearly every California jurisdiction, Long Beach included. Long Beach-specific variations are confirmed with the issuing department above.

Usually doesn't (general norm)

  • Maintenance sealing of accessible duct joints (verify locally)
  • Replacing registers and grilles
  • Repairing insulation on existing ducts

Documents & plans generally required

Common reasons duct replacement applications get bounced

Code-rooted patterns across California — not a Long Beach-specific rejection rate.

The inspection sequence

A typical order — the number of stops and exact sequence vary by jurisdiction and scope.

  1. 1Rough inspection where ducts are concealed in framing before cover
  2. 2Final inspection with the system complete and the HERS duct-leakage results registered where required

Licensing — who can pull it

Duct replacement in California is generally C-20 (HVAC) licensed work; a B (General Building) contractor may pull within a larger remodel under CSLB rules. The HERS duct test is performed by an independent third-party rater, not the installing contractor.

Other verified Long Beach notes

Frequently asked questions

Does a duct repair need a permit?

Small like-for-like repairs are often treated as maintenance, but replacement and extension are permitted mechanical work — and once the altered footage in unconditioned space passes roughly 40 linear feet, the Energy Code's sealing-and-testing requirements generally come with it. Describe the real scope; cities notice 'repairs' that replace half a system.

What leakage does the HERS test allow?

The allowed leakage is a percentage of system airflow set by the Energy Code, and it differs for new, entirely replaced, and altered duct systems. The practical version: mastic at every joint, tested by an independent HERS rater, results registered — an unregistered test doesn't close the permit.

What R-value do ducts need?

Title 24 sets duct insulation by climate zone — commonly R-6 or R-8 for ducts in unconditioned space, with R-8 required in many zones. The CF1R-ALT documents the value for the project's zone, and both the inspector and the HERS rater look at the duct label.

Do I need a separate permit if I'm also replacing the furnace or AC?

Usually one mechanical permit covers both scopes, but the energy paperwork compounds — the equipment changeout triggers its own measures and the duct replacement its own. The trap is pulling an equipment-only permit and 'discovering' the duct replacement at final.

Other jobs in Long Beach

AC changeoutBattery storageEV charger installAll Long Beach permitsAll California jobs

Want getPermit to map Long Beach in depth?

Join the waitlist with your city and trade. We prioritize the jurisdictions our early users actually work in — and we'll never invent fees or timelines we haven't verified.

Join the waitlist